How to Plan Bend Sequences for Acrylic Boxes

Acrylic boxes are easier to produce when bend order is planned before heating. Start with bends that remain accessible, allow for material thickness and avoid trapping the part against the machine or jig.

1.Why it matters

Each bend changes the part's shape and reference edges. A poor sequence can block the next bend or multiply dimensional error. A simple paper mock-up can reveal problems before material is heated.

2.Practical checklist

· Number bend lines on the drawing and protective film.

· Check inside dimensions and bend allowance.

· Approve one complete box before batching components.

3.Which machine fits?

The Advertising Bender's close lane spacing and four-lane layout suit multi-bend boxes. The Factory Bender is better when the same box is produced continuously with molds.

Frequently asked question

Can several box bends be heated in one pass?

Yes, when spacing, thickness and design allow safe positioning; otherwise use a planned sequence.

Always test a small offcut and follow the machine manual, material safety information and local rules.

Need help choosing a machine? Send us your material, thickness, maximum bend length and daily output.