How to Build an Acrylic Gluing Process Card

A process card records the approved adhesive, needle, flow level, travel speed, joint preparation, curing method and inspection standard for one product. It lets another operator repeat the result without guessing.

1.Why this matters

The card should be created from an approved first article. Add a photo of the joint and note what a failed bead looks like. Update the card only after a controlled test, not during a production batch.

2.Practical checklist

· Prepare the full job before delivery begins.

· Keep one approved setup and change one variable at a time.

· Inspect the cured result before releasing the batch.

3.How it applies

Glueasy's electric gluing machine uses a bottle-fed sealed path, 10-255 flow levels, a listed 0.01-5 ml/s range and 0.6-0.9 mm needles. Standard and UV-compatible versions should be selected according to the actual adhesive.

Frequently asked question

What should be verified before production?

Approve a representative sample with the actual material, adhesive or sheet thickness, then record the successful setup and inspect the cooled or cured result.

Use the machine manual, material or adhesive safety information and local workplace rules. Test a representative sample before production.

Need help evaluating a gluing process? Send Glueasy your product photos, adhesive, joint type and daily output.