Can One Bending Machine Process PMMA, PC, PVC, PETG and ABS?

One machine can process several thermoplastic sheets when heat can be adjusted accurately, but the same setting cannot be copied across materials. PMMA, PC, PVC, PETG, PS and ABS soften and react differently.

1.Why it matters

Material identity matters more than appearance. A clear PC sheet can look like acrylic but need a different heating window. PVC also requires suitable ventilation and strict attention to the sheet supplier's processing instructions.

2.Practical checklist

· Label offcuts so materials are never mixed.

· Create a separate process card for every polymer and thickness.

· Use local ventilation and safety rules for heated plastics.

3.Which machine fits?

Both brochures list PMMA, PC, PVC, PS, PET/PETG and ABS compatibility. Confirm the exact grade through a small trial before production.

Frequently asked question

Which material is easiest for a first test?

Use the material you process most often and a medium thickness, then build a verified setting table from that baseline.

Always test a small offcut and follow the machine manual, material safety information and local rules.

Need help choosing a machine? Send us your material, thickness, maximum bend length and daily output.