A Simple Acrylic Bending Workflow for Repeat Orders

A repeatable workflow has seven steps: identify material, inspect the sheet, mark bends, set lanes, run a test, approve the first part and record the final setup.

1.Why it matters

Skipping the test may save minutes but risk an entire batch. The best workflow makes each decision visible so another operator can reproduce the result without guessing.

2.Practical checklist

· Use a job card with material code and thickness.

· Measure cooled parts because hot dimensions can move.

· Keep one approved sample near the station.

3.Which machine fits?

Use independent lanes on the Advertising Bender for varied orders. Use the Factory Bender's two stations and molds when repeat volume and parallel work dominate.

Frequently asked question

Which setting should be recorded first?

Record all linked variables together: material, thickness, temperature setting, heating time, lane position and forming method.

Always test a small offcut and follow the machine manual, material safety information and local rules.

Need help choosing a machine? Send us your material, thickness, maximum bend length and daily output.